High purity Silver wires (99.99% purity)
High purity Silver
The best wires we know of
0.25mm, 99.99% Silver wire with a Polyethylene dielectric. As a direct replacement for conventional tonearm wire it represents an upgrade easily equivalent to doubling the cost of your cartridge.
0.6mm (AWG23) 0.00042 ohms/cm, 99.99% Silver wire with PTFE dielectric. For internal re-wiring or making in to a tweeter cable (lightly twisted together).
1.0mm (AWG 18) 0.00020 ohms/cm, 99.99% Silver wire with Kapton (ML) dielectric. For internal re-wiring or making in to a bass/midrange or full bandwidth loudspeaker cable. It's simple, it's effective.
Here is a nice upgrade for bi-wirable loudspeakers used with just one set of cables.
Replacing the metal jumpers which connect the two terminals is very effective. The jumpers are made from 99.99% Silver CZAR KCK10000 with Cap29 spade terminals. These are supplied as two pairs (4) of 12.5cm
length and are direct replacements for the horrendous items provided by the manufacturers. Now you can replace brass or even tin connectors with high purity
silver. A simple and highly satisfying upgrade. Made in the UK.
Silver plated Oxygen Free Copper with PTFE insulation
Silver plated Oxygen Free Copper with PTFE
The next best thing to pure Silver
High Purity 99.99% Silver Plated Oxygen Free Copper
of 57/0.45mm (overall diameter of 9.92mm) with PTFE.
A full bandwidth or bass/midrange loudspeaker cable with the power to
reproduce the full dynamic impact of live or studio recorded music.
This is a low distortion and low capacitance cable providing improved sound staging and
a significantly easier load for amplifiers to drive. Supplied terminated
in stereo pairs. Where weight, power and finesse is required. Made in the UK.
SCLl000 pictureHI-FI NEWS AWARDS 2003 EDITORS CHOICE
When we first embarked upon the
odyssey of developing this cable back in 1991 we had no
idea how successful or copied it would become.
99.99% Silver Plated Oxygen Free Copper strands
with PTFE of 19/0.45mm (overall diameter of 3.31mm, AWG12)
with practically zero loss over even very long runs.
Resistance at 330m is just 2.06 Ohms!
Possessing much the same qualities as SCL500 but
designed for full bandwidth reproduction or
as a partner to it (or KCK600) for bass/midrange
signals in a bi-wire/amp setup. As with SCL500, it is
supplied in terminated stereo pairs or as individual wires.
Made in the UK.
SCLl000 JUMPERS pictureHI-FI NEWS AWARDS 2003 EDITORS CHOICE
For bi-wire loudspeakers
used with only one set of loudspeaker cables. Substantially upgrades
the brass links usually used. 12.5cm long, sold as a set of four
with spade terminations. Made in the UK.
99.99% High purity Silver plated Oxygen Free Copper
1/0.6mm, (overall diameter 1.20mm, AWG23) with PTFE. This wire
is just thick enough to avoid the skin effect (a well
documented and understood phenomenon whereby
high frequency signals progressively concentrate at
the periphery of the conductor, producing a smeared
aggressive sound in thicker cables- and you thought it was your
tweeters! Perfect as a tweeter cable in a bi-wire/amp
setup or for rewiring loudspeakers or other
electronics. Made in the UK.
The LynX Price
Loudspeaker noise filter picture
Prevents RF noise pickup by loudspeaker cables
Results in an increase in overall transparency
These devices are fitted across the loudspeaker terminals
to relieve the loudspeaker system of ultra high frequency energy. They make an astonishing
difference improving image depth. They remove "fuzz" or "ringing" which masks subtle and
delicate ambient decay. A must for any high resolution system.
Supplied as a pair. If you bi-wire/bi-amp you need a second pair. If, however, you only want to
use one pair - fit them to the tweeter (high frequency) terminals.